#include #include #include #include unsigned long systemClock; //-----------------SYSTEM CLOCK [VERY IMPORTANT] unsigned long lastPulse; //-------------------LAST void loop() PULSE char *firmwareRev = "1.1"; //VERSION int EEPROMVersion = 1; //version control to rewrite eeprom after update int EEPROMBuild = 1; //----------------------------------------------------------------------------- RUNTIME VARIABLES bool fullAlarm = false; //bool to control if this is a full alarm that requres a panel reset to clear bool silenced = false; bool keyInserted = false; //if the control panel has a key inserted bool readyLedStatus = false; //ready led status (this variable is for the trouble response code) bool horn = false; //bool to control if the horns are active bool strobe = false; //bool to control if the strobes are active bool trouble = false; //bool to control if the panel is in trouble bool troubleAck = false; //bool to control if the trouble is acknowledged bool configMenu = false; //determine if the control panel is in the configuration menu bool resetPressed = false; bool silencePressed = false; //make sure that presses don't count more than once bool drillPressed = false; bool resetStillPressed = false; bool silenceStillPressed = false; //make sure that presses don't count more than once bool drillStillPressed = false; bool updateScreen = false; //updating the screen in the config menu bool possibleAlarm = false; //panel receieved 0 from pull station ciruit and is now investigating bool definiteAlarm = false; //panel has investigated and determined that it was not a fluke bool walkTest = false; //is the system in walk test bool silentWalkTest = false; bool backlightOn = true; bool keyRequiredVisual; //variable for panel security bool debug = false; int characters[] = {32,45,46,47,48,49,50,51,52,53,54,55,56,57,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90}; //characters allowed on name int panelNameList[16]; int clearTimer = 0; //timer for keeping track of button holding for clearing character in the name editor int verification = 0; //number to keep track of ms for verification int drill = 0; //number to keep track of ms for drill int buttonCheckTimer = 0; //add a slight delay to avoid double-clicking buttons int troubleTimer = 0; //ms for trouble int codeWheelTimer = 0; //code wheel timing variable int troubleLedTimer = 0; //number to keep track of ms for trouble light int alarmLedTimer = 0; //alarm led timer int troubleType = 0; //trouble type 0 - general, 1 - eol resistor int lcdUpdateTimer = 0; //update delay int lcdTimeoutTimer = 0; //timer to keep track of how long until lcd off int walkTestSmokeDetectorTimer = 0; int currentScreen = -1; //update display if previous screen is not the same int configPage = 0; //config page for the config menu int cursorPosition = 0; //which menu item the cursor is over int zerosCounted = 0; //verification variable int walkTestCount = 0; //keep track of walk test activations int zoneAlarm = 0; //which zone is in alarm 0 - none | 1 - zone 1 | 2 - zone 2 | 3 - zone 1 & 2 String configTop; //configuration menu strings for lcd String configBottom; String currentConfigTop; //configuration menu strings for current lcd display String currentConfigBottom; byte lock[] = { //lock icon B01110, B10001, B10001, B11111, B11011, B11011, B11111, B00000 }; byte check[] = { //check mark icon B00000, B00001, B00011, B10110, B11100, B01000, B00000, B00000 }; //Default EEPROM values in the case that the EEPROM fails to load bool keyRequired = false; //determine if key switch is required to operate buttons bool isVerification = true; //is verification turned on bool eolResistor = true; //is the EOL resistor enabled bool preAlarm = false; //use pre-alarm? bool smokeDetectorPreAlarm = false; //should smoke detectors activate first stage bool audibleSilence = true; int smokeDetectorTimeout = 5; //how long should smoke detector pre-alarm wait before cancelling the pre-alarm int firstStageTime = 1; //time in minutes that first stage should last int codeWheel = 0; //which alarm pattern to use, code-3 default int verificationTime = 250; //int resistorLenience = 0; DEPRECATED int panelHomescreen = 0; int lcdTimeout = 0; String panelName = ""; LiquidCrystal_I2C lcd(0x27,16,2); //PINS int zone1Pin = 15; int zone2Pin = 15; //TESTING is set to 15 but is normally 39. int hornRelay = 13; int buzzerPin = 4; int strobeRelay = 18; int smokeDetectorRelay = 14; int readyLed = 27; int silenceLed = 26; int alarmLed = 25; int keySwitchPin = 33; int resetButtonPin = 32; int silenceButtonPin = 35; int drillButtonPin = 34; int sclPin = 22; int sdaPin = 21; //----------------------------------------------------------------------------- RUNTIME VARIABLES //get resistor lenience by having zone 1, zone 2, and smoke on a output pin instead of +3.3v so you can measure the difference //have it so holding down the drill button causes a visual indicator on the display along with blinking the alarm led really fast //Add feature to calibrate activating, trouble, and normal voltages using the IO output instead of 3.3v //maybe instead of looking for 0s for activation, simply look for a dip in voltage //----------------------------------------------------------------------------- EEPROM RESET void resetEEPROM() { for (int i=0; i<=1024; i++){ //write all 255's from 0-1024 address EEPROM.write(i,255); } Serial.println("Erased EEPROM"); EEPROM.write(0,76);EEPROM.write(1,101);EEPROM.write(2,120);EEPROM.write(3,122);EEPROM.write(4,97);EEPROM.write(5,99);EEPROM.write(6,104); //write Lexzach to addresses 0-6 Serial.println("Wrote LEXZACH header"); EEPROM.write(7,0); //code-3 default Serial.println("Configured Code-3"); EEPROM.write(8,0); //key not required by default Serial.println("Disabled key"); EEPROM.write(9,1); //verification is turned on by default Serial.println("Turned on verification"); EEPROM.write(10,25); //default verification time of 2.5 seconds Serial.println("Set verification time of 2.5 seconds"); //system name "ANTIGNEOUS" EEPROM.write(11,65);EEPROM.write(12,78);EEPROM.write(13,84);EEPROM.write(14,73);EEPROM.write(15,71);EEPROM.write(16,78);EEPROM.write(17,69);EEPROM.write(18,79);EEPROM.write(19,85);EEPROM.write(20,83); Serial.println("Wrote system name 'ANTIGNEOUS'"); for (int i=21; i<=26; i++){ //write all 0's from 21-26 address EEPROM.write(i,32); } Serial.println("Wrote 6 blank spaces"); EEPROM.write(50, EEPROMVersion); //write current version and build EEPROM.write(51, EEPROMBuild); Serial.println("Wrote EEPROM version and build"); //EEPROM.write(72,125); //EOL lenience 500 by default (take the value stored and multiply by 4 to get actual value) //Serial.println("Set EOL lenience to 500"); EEPROM.write(73,1); //EOL resistor is enabled by default Serial.println("Enabled EOL resistor"); EEPROM.write(74,0); //pre-alarm disabled by default Serial.println("Disabled pre-alarm"); EEPROM.write(75,1); //pre-alarm first-stage is 1 minute by default Serial.println("Set pre-alarm first stage to 1 minute"); EEPROM.write(76,0); //smoke detector pre-alarm is disable by default Serial.println("Disabled smoke detector pre-alarm"); EEPROM.write(77,5); //smoke detector timeout is five minutes by default Serial.println("Set smoke detector timeout to 5 minutes"); EEPROM.write(78,0); //homescreen is panel name by default Serial.println("Set panel name as homescreen"); EEPROM.write(79,1); //audible silence is enabled by default Serial.println("Enabled audible silence"); EEPROM.write(80,0); //lcd timeout is disabled by default (time in MS found by taking value and multiplying it by 15000) Serial.println("Disabled LCD timeout"); EEPROM.commit(); Serial.println("Wrote changes to EEPROM"); } //----------------------------------------------------------------------------- EEPROM RESET void setup() { EEPROM.begin(1025); //allocate memory address 0-1024 for EEPROM Serial.println("Configured EEPROM for addresses 0-1024"); Serial.begin(115200); //begin serial Serial.println("Lexzach's Low-Cost FACP v1"); Serial.println("Booting..."); //----------------------------------------------------------------------------- SETUP PINS pinMode(hornRelay, OUTPUT); //horn pinMode(strobeRelay, OUTPUT); //strobe pinMode(smokeDetectorRelay, OUTPUT); //smoke relay pinMode(readyLed, OUTPUT); //ready LED pinMode(silenceLed, OUTPUT); //silence LED pinMode(alarmLed, OUTPUT); //alarm LED pinMode(keySwitchPin, INPUT); //key switch pinMode(resetButtonPin, INPUT); //reset switch pinMode(silenceButtonPin, INPUT); //silence switch pinMode(drillButtonPin, INPUT); //drill switch pinMode(zone1Pin, INPUT); //zone 1 pinMode(zone2Pin, INPUT); //zone 2 pinMode(buzzerPin, OUTPUT); //buzzer digitalWrite(hornRelay, HIGH); //horn digitalWrite(strobeRelay, HIGH); //strobe digitalWrite(smokeDetectorRelay, HIGH); //smoke relay pinMode(sclPin, OUTPUT); //scl pinMode(sdaPin, OUTPUT); //sda //----------------------------------------------------------------------------- SETUP PINS Serial.println("Initializing LCD..."); lcd.init(); //initialize LCD lcd.createChar(0, lock); //create the lock character lcd.createChar(1, check); //create the lock character lcd.backlight(); //----------------------------------------------------------------------------- EEPROM RESET BUTTONS if (digitalRead(resetButtonPin)==HIGH and digitalRead(silenceButtonPin)==HIGH and digitalRead(drillButtonPin)==HIGH){ //reset EEPROM if all buttons are pressed for(int i=5; i!=0; i--){ lcd.clear(); lcd.setCursor(0,0); lcd.print("TO FACTORY RESET"); lcd.setCursor(0,1); lcd.print((String)"HOLD BUTTONS - "+i); delay(1000); } if (digitalRead(resetButtonPin)==HIGH and digitalRead(silenceButtonPin)==HIGH and digitalRead(drillButtonPin)==HIGH){ lcd.clear(); lcd.setCursor(0,0); lcd.print("RESETTING TO"); lcd.setCursor(0,1); lcd.print("FACTORY SETTINGS"); resetEEPROM(); delay(4000); ESP.restart(); } else { lcd.clear(); lcd.setCursor(0,0); lcd.print("FACTORY RESET"); lcd.setCursor(0,1); lcd.print("CANCELLED"); delay(3000); } } //----------------------------------------------------------------------------- EEPROM RESET BUTTONS if (digitalRead(silenceButtonPin)==HIGH){ debug = true; } lcd.clear(); lcd.setCursor(4,0); lcd.print("BOOTING..."); lcd.setCursor(0,1); lcd.print("I/O"); delay(100); Serial.println("Configured all pins"); //EEPROM.write(0,255); //-------------------------------------------------------UNCOMMENT TO INVALIDATE EEPROM AND REFLASH IT AFTER EVERY RESTART //EEPROM.commit(); Serial.println("Verifying EEPROM configuration integrity..."); //----------------------------------------------------------------------------- EEPROM INTEGRETY if (EEPROM.read(0) != 76 or EEPROM.read(6) != 104 or EEPROM.read(7) > 5 or EEPROM.read(8) > 1 or EEPROM.read(50) != EEPROMVersion or EEPROM.read(51) != EEPROMBuild){ Serial.println("EEPROM verification failed."); lcd.clear(); lcd.setCursor(0,0); lcd.print("ERROR 1"); lcd.setCursor(0,1); lcd.print("check manual"); while(digitalRead(resetButtonPin) == LOW and digitalRead(drillButtonPin) == LOW){ //wait until button is pressed delay(1); } if(digitalRead(resetButtonPin) == HIGH){ Serial.println("Resetting..."); ESP.restart(); } else if (digitalRead(drillButtonPin) == HIGH){ resetEEPROM(); } } else { Serial.println("EEPROM integrity verified"); } //----------------------------------------------------------------------------- EEPROM INTEGRETY lcd.clear(); lcd.setCursor(4,0); lcd.print("BOOTING..."); lcd.setCursor(0,1); lcd.print("I/O-SLFTST"); delay(100); Serial.println("Current EEPROM dump:"); //dump EEPROM into serial monitor for (int i=0; i<=1024; i++){ Serial.print(EEPROM.read(i)); Serial.print(" "); } Serial.println(); //CONFIG LOADING ROUTINE Serial.println("Loading config from EEPROM..."); codeWheel = EEPROM.read(7); //codeWheel setting address if (EEPROM.read(8) == 1){ keyRequired = true; } else { keyRequired = false; } //----------------------------- Panel security variable if (keyRequired){ keyRequiredVisual = true; } else { keyRequiredVisual = false; } //----------------------------- Panel security variable if (EEPROM.read(9) == 1){ isVerification = true; } else { isVerification = false; } if (EEPROM.read(73) == 1){ eolResistor = true; } else { eolResistor = false; } if (EEPROM.read(74) == 1){ preAlarm = true; } else { preAlarm = false; } if (EEPROM.read(76) == 1){ smokeDetectorPreAlarm = true; } else { smokeDetectorPreAlarm = false; } if (EEPROM.read(79) == 1){ audibleSilence = true; } else { audibleSilence = false; } smokeDetectorTimeout = EEPROM.read(77)*60000; firstStageTime = EEPROM.read(75)*60000; verificationTime = EEPROM.read(10)*100; //resistorLenience = EEPROM.read(72)*4; DEPRECATED panelHomescreen = EEPROM.read(78); lcdTimeout = EEPROM.read(80)*15000; int x=0; for (int i=11; i<=26; i++){ //read panel name if (EEPROM.read(i) != 0){ panelName = panelName + (char)EEPROM.read(i); panelNameList[x] = EEPROM.read(i); x++; } } lcd.clear(); lcd.setCursor(4,0); lcd.print("BOOTING..."); lcd.setCursor(0,1); lcd.print("I/O-SLFTST-CONFIG"); delay(100); Serial.println("Config loaded"); digitalWrite(readyLed, HIGH); //power on ready LED on startup readyLedStatus = true; digitalWrite(silenceLed, LOW); digitalWrite(alarmLed, LOW); digitalWrite(smokeDetectorRelay, LOW); //turn on smoke relay lastPulse = millis(); //start last pulse Serial.println("-=- STARTUP COMPLETE -=-"); } void tone() { ledcSetup(0, 5000, 8); // setup beeper ledcAttachPin(buzzerPin, 0); // attach beeper ledcWriteTone(0, 1500); // play tone } void noTone() { ledcSetup(0, 5000, 8); // setup beeper ledcAttachPin(buzzerPin, 0); // attach beeper ledcWriteTone(0, 0); // stop tone } void activateNAC(){ horn = true; strobe = true; fullAlarm = true; silenced = false; configMenu = false; tone(); digitalWrite(alarmLed, HIGH); digitalWrite(silenceLed, LOW); } void checkKey(){ if (digitalRead(keySwitchPin) == HIGH){ if (keyInserted == false and keyRequired == true){ currentScreen=-1; keyInserted = true; } } else { if (keyInserted == true and keyRequired == true){ currentScreen=-1; keyInserted = false; drillPressed=false; silencePressed=false; //make sure all buttons are registered as depressed after key is removed resetPressed=false; drillStillPressed=false; resetStillPressed=false; silenceStillPressed=false; drill = 0; } } } //----------------------------------------------------------------------------- CHECK ACTIVATION DEVICES void checkDevices(){ if (debug == true){ Serial.println(analogRead(zone1Pin)); } if (walkTest == 0){ if ((analogRead(zone1Pin) == 0 or analogRead(zone2Pin) == 0) and horn != true and silenced==false){ possibleAlarm = true; } if (possibleAlarm == true and horn != true and strobe != true and silenced==false and isVerification == true){ //verification code if (analogRead(zone1Pin) == 0 or analogRead(zone2Pin) == 0){ zerosCounted++; } if (verification >= verificationTime){ if (zerosCounted > 0.1*verificationTime and analogRead(zone1Pin) == 0 and analogRead(zone2Pin) == 0){ definiteAlarm = true; possibleAlarm = false; zerosCounted = 0; verification = 0; } else { zerosCounted = 0; possibleAlarm = false; verification = 0; } } else { verification++; } } } else if (walkTest == true){ if (analogRead(zone1Pin) == 0){// or analogRead(zone2Pin) == 0){ walkTestCount++; walkTestSmokeDetectorTimer = 0; while (analogRead(zone1Pin) == 0) {// or analogRead(zone2Pin) <= resistorLenience) { --------------------------------- SOMEHOW FIX THIS, terribly designed devices that add voltage into the system can screw this up digitalWrite(strobeRelay, LOW); if (silentWalkTest == false){ digitalWrite(hornRelay, LOW); } digitalWrite(alarmLed, HIGH); walkTestSmokeDetectorTimer++; if (walkTestSmokeDetectorTimer >= 500){ digitalWrite(smokeDetectorRelay, HIGH); } delay(1); } digitalWrite(strobeRelay, HIGH); if (silentWalkTest == false){ digitalWrite(hornRelay, HIGH); } digitalWrite(alarmLed, LOW); currentScreen = -1; delay(250); digitalWrite(smokeDetectorRelay, LOW); } } if (definiteAlarm == true or (isVerification == false and analogRead(zone1Pin) == 0 and horn != true and silenced==false)){ //activate the horns and strobes after verification activateNAC(); definiteAlarm = false; } else if ((analogRead(zone1Pin) == 4095 or analogRead(zone2Pin) == 4095) and eolResistor == true and troubleTimer >= 200) { trouble = true; troubleType=1; } else if ((analogRead(zone1Pin) == 4095 or analogRead(zone2Pin) == 4095) and eolResistor == true and troubleTimer <= 200){ troubleTimer++; } else { troubleTimer = 0; } } //----------------------------------------------------------------------------- CHECK ACTIVATION DEVICES //----------------------------------------------------------------------------- TROUBLE RESPONSE void troubleCheck(){ if (trouble == true){ if (troubleLedTimer >= 200){ if (readyLedStatus == true){ digitalWrite(readyLed, LOW); readyLedStatus = false; if (troubleAck==false){ noTone(); } } else { digitalWrite(readyLed, HIGH); readyLedStatus = true; if (troubleAck==false){ tone(); } } troubleLedTimer = 0; } else { troubleLedTimer++; } } else { if (walkTest == false){ digitalWrite(readyLed, HIGH); readyLedStatus = true; } if (troubleLedTimer != 0){ noTone(); } troubleLedTimer=0; } } //----------------------------------------------------------------------------- TROUBLE RESPONSE //----------------------------------------------------------------------------- RESET CODE void reboot(){ lcd.clear(); lcd.setCursor(2,0); lcd.print("Resetting..."); tone(); digitalWrite(readyLed, HIGH); //ready LED digitalWrite(silenceLed, HIGH); //silence LED digitalWrite(alarmLed, HIGH); //alarm LED digitalWrite(hornRelay, HIGH); //horn digitalWrite(strobeRelay, HIGH); //strobe digitalWrite(smokeDetectorRelay, HIGH); //smoke relay lcd.backlight(); delay(2500); noTone(); digitalWrite(readyLed, LOW); //ready LED digitalWrite(silenceLed, LOW); //silence LED digitalWrite(alarmLed, LOW); //alarm LED ESP.restart(); } //----------------------------------------------------------------------------- RESET CODE //----------------------------------------------------------------------------- BUTTON CHECK void checkButtons(){ if (digitalRead(resetButtonPin) == HIGH){ //RESET BUTTON reboot(); } if (digitalRead(silenceButtonPin) == HIGH){ //SILENCE BUTTON if (horn == true){ //if horns are not silenced, silence the horns digitalWrite(silenceLed, HIGH); digitalWrite(alarmLed, LOW); horn = false; if (audibleSilence == false){ strobe = false; } silenced=true; noTone(); } else if (horn == false and strobe == false and trouble == true and silencePressed == false and troubleAck==false){ troubleAck = true; noTone(); } else if (horn == false and strobe == false and fullAlarm == false and silencePressed == false and configMenu == false){ configMenu = true; resetStillPressed = true; //make sure the menu doesn't close out as soon as someone opens it silenceStillPressed = true; drillStillPressed = true; char *main[] = {"Testing","Settings"}; //menu 0 configTop = (String)main[0]; configBottom = (String)main[1]; configPage = 0; cursorPosition = 0; currentConfigBottom = ""; currentConfigTop = ""; } silencePressed = true; } else { silencePressed = false; } if (digitalRead(drillButtonPin) == HIGH and horn != true){ //DRILL BUTTON if (drill >= 5000){ activateNAC(); } else { drill++; } drillPressed = true; } else { drill = 0; drillPressed = false; } } //----------------------------------------------------------------------------- BUTTON CHECK //----------------------------------------------------------------------------- NAC ACTIVATION void alarm(){ if (strobe == true){ digitalWrite(strobeRelay, LOW); }else{ digitalWrite(strobeRelay,HIGH); } if (horn == true){ if (codeWheel == 0){ if (codeWheelTimer == 0){ //temporal code 3 digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 500) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 1000) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 1500) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 2000) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 2500) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 4000) { codeWheelTimer = -1; } } else if (codeWheel == 1) { if (codeWheelTimer == 0){ //marchtime digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 250){ digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 500){ codeWheelTimer = -1; } } else if (codeWheel == 2) { //4-4 if (codeWheelTimer == 0) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 300) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 600) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 900) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 1200) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 1500) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 1800) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 2100) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 2850) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 3150) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 3450) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 3750) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 4050) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 4350) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 4650) { digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 4950) { digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 14950) { codeWheelTimer = -1; } } else if (codeWheel == 3) { //continuous digitalWrite(hornRelay, LOW); } else if (codeWheel == 5) { if (codeWheelTimer == 0){ //marchtime slower digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 500){ digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 1000){ codeWheelTimer = -1; } } else if (codeWheel == 4) { if (codeWheelTimer == 0){ //california code digitalWrite(hornRelay, LOW); } else if (codeWheelTimer == 10000){ digitalWrite(hornRelay, HIGH); } else if (codeWheelTimer == 15000){ codeWheelTimer = -1; } } codeWheelTimer++; alarmLedTimer++; if (alarmLedTimer >= 750){ if (digitalRead(25) == false){ digitalWrite(alarmLed, HIGH); alarmLedTimer = 0; } else { digitalWrite(alarmLed, LOW); alarmLedTimer = 0; } } } else { digitalWrite(hornRelay, HIGH); codeWheelTimer = 0; } } //----------------------------------------------------------------------------- NAC ACTIVATION void lcdUpdate(){ if (trouble==false and fullAlarm==false and horn==false and strobe==false and walkTest == false and currentScreen != 0 and drill == 0){ lcd.noAutoscroll(); lcd.clear(); if (keyRequired == true and keyInserted == false){ lcd.setCursor(0,0); lcd.write(byte(0)); lcd.print(" System Normal"); } else { lcd.setCursor(2,0); lcd.print("System Normal"); } lcd.setCursor(0,1); if (panelHomescreen == 0){ lcd.print(panelName); } else if (panelHomescreen == 1){ lcd.print(analogRead(zone1Pin)); } currentScreen = 0; } else if (trouble==true){ if (troubleType == 0 and currentScreen != 1){ lcd.clear(); lcd.setCursor(1,0); lcd.print("* Trouble *"); lcd.setCursor(0,1); lcd.print("Unknown"); currentScreen = 1; } else if (troubleType == 1 and currentScreen != 2){ lcd.clear(); lcd.setCursor(1,0); lcd.print("* Trouble *"); lcd.setCursor(0,1); lcd.print("Ground Fault"); currentScreen = 2; } } else if (fullAlarm == true and silenced == false and currentScreen != 3){ lcd.clear(); lcd.setCursor(1,0); lcd.print("* FIRE ALARM *"); // lcd.setCursor(2,1); // lcd.print("Zone 1"); currentScreen = 3; } else if (silenced == true and currentScreen != 4){ lcd.clear(); lcd.setCursor(1,0); lcd.print("* FIRE ALARM *"); lcd.setCursor(1,1); lcd.print("-- SILENCED --"); // lcd.setCursor(2,1); // lcd.print("Zone 1"); currentScreen = 4; } else if (walkTest == true and currentScreen != 5) { lcd.clear(); lcd.setCursor(0,0); lcd.print("* Supervisory *"); lcd.setCursor(0,1); if (silentWalkTest == false){ lcd.print("Walk Test - "+(String)walkTestCount); } else { lcd.print("S. Wlk Test - "+(String)walkTestCount); } currentScreen = 5; digitalWrite(readyLed, LOW); //ready led off for walk test } else if (drillPressed == true and fullAlarm == false and horn == false and strobe == false and walkTest == false and currentScreen != 6) { lcd.clear(); lcd.setCursor(0,0); lcd.print("CONTINUE HOLDING"); lcd.setCursor(1,1); lcd.print("TO START DRILL"); currentScreen = 6; } } void config(){ char *main[] = {"Testing","Settings"}; //menu 0 char *mainTesting[] = {"Walk Test","Silent Wlk Test","Strobe Test"}; //menu 1 char *mainSettings[] = {"Fire Alarm","Panel"}; //menu 2 char *mainSettingsFireAlarmSettings[] = {"Coding","Verification","Pre-Alarm","Audible Sil.: ","Keyless Sil."}; //menu 3 char *mainSettingsVerificationSettings[] = {"Verification: ","Verif. Time"}; //menu 4 char *mainSettingsFireAlarmSettingsCoding[] = {"Temporal Three","Marchtime","4-4","Continuous","California","Slow Marchtime"}; //menu 5 char *mainSettingsFireAlarmSettingsPreAlarmSettings[] = {"Pre-Alarm: ","stage 1: ","Detector PreAlrm"}; //menu 6 char *mainSettingsFireAlarmSettingsPreAlarmSettingsSmokeDetectorPreAlarmSettings[] = {"Det. PreAlrm: ","Det. 1st stge: ","Det. Tmeout: "}; //menu 7 char *mainPanelSettings[] = {"Panel Name","Panel Security","LCD Dim:","Factory Reset","About","Calibration"}; //menu 8 char *mainPanelSettingsPanelSecurity[] = {"None","Keyswitch","Passcode"}; //menu 9 char *mainPanelSettingsPanelName[] = {"Enter Name:"}; //menu 10 char *mainPanelSettingsAbout[] = {"Antigneous FACP","Firmware: ","by Lexzach"}; //menu 12 char *mainPanelSettingsCalibrate[] = {"Activated Zone 1", "Normal Zone 1", "Trouble Zone 1", "Activated Zone 2", "Normal Zone 2", "Trouble Zone 2"}; //menu 13 // char *mainPanelSettingsHomescreen[] = {"Panel Name", "Stats for Nerds"}; //menu 10 // char *mainPanelSettingsHomescreenStatsForNerds[] = {"Zone Input Voltages"}; //menu 11 if (digitalRead(resetButtonPin) == HIGH){ //RESET BUTTON resetPressed = true; } else { resetPressed = false; resetStillPressed = false; } if (digitalRead(silenceButtonPin) == HIGH){ //SILENCE BUTTON silencePressed = true; } else { silencePressed = false; silenceStillPressed = false; } if (digitalRead(drillButtonPin) == HIGH){ //DRILL BUTTON drillPressed = true; } else { drillPressed = false; drillStillPressed = false; } //----------------------------------------------------------------------------- MAIN MENU if (configPage == 0){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ //main screen cursorPosition = 1; configTop = (String)main[1]; configBottom = (String)main[0]; } else if (cursorPosition == 1){ cursorPosition = 0; configTop = (String)main[0]; configBottom = (String)main[1]; } } else if (silencePressed == true and silenceStillPressed == false){ silencePressed = true; configMenu = false; currentScreen=-1; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ //cursor over testing configPage = 1; //change screen to testing cursorPosition = 0; configTop = (String)mainTesting[0]; configBottom = (String)mainTesting[1]; } else if (cursorPosition == 1){ //cursor over settings configPage = 2; //change screen to settings cursorPosition = 0; configTop = (String)mainSettings[0]; configBottom = (String)mainSettings[1]; } } //----------------------------------------------------------------------------- MAIN MENU //----------------------------------------------------------------------------- TESTING } else if (configPage == 1){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; configTop = (String)mainTesting[1]; configBottom = (String)mainTesting[2]; } else if (cursorPosition == 1) { cursorPosition = 2; configTop = (String)mainTesting[2]; configBottom = (String)mainTesting[0]; } else if (cursorPosition == 2) { cursorPosition = 0; configTop = (String)mainTesting[0]; configBottom = (String)mainTesting[1]; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 0; cursorPosition = 0; configTop = (String)main[0]; configBottom = (String)main[1]; strobe = false; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ walkTest = true; silentWalkTest = false; silencePressed = true; configMenu = false; currentScreen=-1; walkTestCount = 0; } else if (cursorPosition == 1) { walkTest = true; silentWalkTest = true; silencePressed = true; configMenu = false; currentScreen=-1; walkTestCount = 0; } else if (cursorPosition == 2) { if (strobe == false){ strobe = true; configTop = (String)mainTesting[2]+" *"; } else { strobe = false; configTop = (String)mainTesting[2]; } } } //----------------------------------------------------------------------------- TESTING //----------------------------------------------------------------------------- SETTINGS } else if (configPage == 2){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ //main screen cursorPosition = 1; configTop = (String)mainSettings[1]; configBottom = (String)mainSettings[0]; } else if (cursorPosition == 1){ cursorPosition = 0; configTop = (String)mainSettings[0]; configBottom = (String)mainSettings[1]; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 0; cursorPosition = 0; configTop = (String)main[0]; configBottom = (String)main[1]; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ configPage = 3; //change screen to facp settings cursorPosition = 0; configTop = (String)mainSettingsFireAlarmSettings[0]; configBottom = (String)mainSettingsFireAlarmSettings[1]; } else if (cursorPosition == 1){ configPage = 8; //change screen to facp settings cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; } } //----------------------------------------------------------------------------- SETTINGS //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM } else if (configPage == 3){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; configTop = (String)mainSettingsFireAlarmSettings[1]; configBottom = (String)mainSettingsFireAlarmSettings[2]; } else if (cursorPosition == 1) { cursorPosition = 2; configTop = (String)mainSettingsFireAlarmSettings[2]; configBottom = (String)mainSettingsFireAlarmSettings[3]+audibleSilence; } else if (cursorPosition == 2) { cursorPosition = 3; configTop = (String)mainSettingsFireAlarmSettings[3]+audibleSilence; configBottom = (String)mainSettingsFireAlarmSettings[0]; } else if (cursorPosition == 3) { cursorPosition = 0; configTop = (String)mainSettingsFireAlarmSettings[0]; configBottom = (String)mainSettingsFireAlarmSettings[1]; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 2; cursorPosition = 0; configTop = (String)mainSettings[0]; configBottom = (String)mainSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ configPage = 5; cursorPosition = 0; if (codeWheel == 0){ configTop = (String)mainSettingsFireAlarmSettingsCoding[0] + "*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[0]; } if (codeWheel == 1){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[1] + "*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[1]; } } else if (cursorPosition == 1) { configPage = 4; cursorPosition = 0; configTop = (String)mainSettingsVerificationSettings[0]+isVerification; configBottom = (String)mainSettingsVerificationSettings[1]; } else if (cursorPosition == 2) { configPage = 6; cursorPosition = 0; configTop = (String)mainSettingsFireAlarmSettingsPreAlarmSettings[0]; configBottom = (String)mainSettingsFireAlarmSettingsPreAlarmSettings[1]; } else if (cursorPosition == 3) { if (audibleSilence == true){ audibleSilence = false; EEPROM.write(79,0); } else { audibleSilence = true; EEPROM.write(79,1); } EEPROM.commit(); configTop = (String)mainSettingsFireAlarmSettings[3]+audibleSilence; configBottom = (String)mainSettingsFireAlarmSettings[0]; } } //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM //----------------------------------------------------------------------------- SETTINGS > PANEL } else if (configPage == 8){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; configTop = (String)mainPanelSettings[1]; if (lcdTimeout == 0){ configBottom = (String)mainPanelSettings[2] + "off"; } else if (lcdTimeout<=30000) { configBottom = (String)mainPanelSettings[2] + lcdTimeout/1000+"s"; } else { configBottom = (String)mainPanelSettings[2] + lcdTimeout/60000+"m"; } } else if (cursorPosition == 1) { cursorPosition = 2; if (lcdTimeout == 0){ configTop = (String)mainPanelSettings[2] + "off"; } else if (lcdTimeout<=30000) { configTop = (String)mainPanelSettings[2] + lcdTimeout/1000+"s"; } else { configTop = (String)mainPanelSettings[2] + lcdTimeout/60000+"m"; } configBottom = (String)mainPanelSettings[3]; } else if (cursorPosition == 2) { cursorPosition = 3; configTop = (String)mainPanelSettings[3]; configBottom = (String)mainPanelSettings[4]; } else if (cursorPosition == 3) { cursorPosition = 4; configTop = (String)mainPanelSettings[4]; configBottom = (String)mainPanelSettings[5]; } else if (cursorPosition == 4) { cursorPosition = 5; configTop = (String)mainPanelSettings[5]; configBottom = (String)mainPanelSettings[0]; } else if (cursorPosition == 5) { cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 2; cursorPosition = 0; configTop = (String)mainSettings[0]; configBottom = (String)mainSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ configPage = 10; cursorPosition = 0; configTop = "Enter Name:"; configBottom = (String)panelName; lcd.blink_on(); } else if (cursorPosition == 1) { configPage = 9; cursorPosition = 0; if (keyRequiredVisual == true){ configTop = (String)mainPanelSettingsPanelSecurity[0]; configBottom = (String)mainPanelSettingsPanelSecurity[1]+"*"; } else { configTop = (String)mainPanelSettingsPanelSecurity[0]+"*"; configBottom = (String)mainPanelSettingsPanelSecurity[1]; } } else if (cursorPosition == 2) { if (lcdTimeout == 0){ lcdTimeout = 15000; EEPROM.write(80,1); } else if (lcdTimeout == 15000){ lcdTimeout = 30000; EEPROM.write(80,2); } else if (lcdTimeout == 30000){ lcdTimeout = 60000; EEPROM.write(80,4); } else if (lcdTimeout == 60000){ lcdTimeout = 300000; EEPROM.write(80,20); } else if (lcdTimeout == 300000){ lcdTimeout = 600000; EEPROM.write(80,40); } else if (lcdTimeout >= 600000){ lcdTimeout = 0; EEPROM.write(80,0); } EEPROM.commit(); if (lcdTimeout == 0){ configTop = (String)mainPanelSettings[2] + "off"; } else if (lcdTimeout<=30000) { configTop = (String)mainPanelSettings[2] + lcdTimeout/1000+"s"; } else { configTop = (String)mainPanelSettings[2] + lcdTimeout/60000+"m"; } } else if (cursorPosition == 3){ configBottom = "drill = yes"; configTop = "silence = no"; configPage = -1; } else if (cursorPosition == 4){ configPage = 12; cursorPosition = 0; configTop = (String)mainPanelSettingsAbout[0]; configBottom = (String)mainPanelSettingsAbout[1]+firmwareRev; } } //----------------------------------------------------------------------------- SETTINGS > PANEL //----------------------------------------------------------------------------- SETTINGS > PANEL > PANEL NAME } else if (configPage == 10){ //panel rename routine if (resetPressed == true and resetStillPressed == false){ clearTimer = 0; if (panelNameList[cursorPosition] == 90){ panelNameList[cursorPosition] = 32; } else if (panelNameList[cursorPosition] == 32){ panelNameList[cursorPosition] = 39; } else if (panelNameList[cursorPosition] == 39){ panelNameList[cursorPosition] = 45; } else if (panelNameList[cursorPosition] == 57){ panelNameList[cursorPosition] = 65; } else { panelNameList[cursorPosition] = panelNameList[cursorPosition] + 1; } } else if (resetPressed==true and resetStillPressed==true) { clearTimer++; if (clearTimer >= 35) { //clear character if held down panelNameList[cursorPosition] = 32; } } else if (silencePressed == true and silenceStillPressed == false){ int x=0; for (int i=11; i<=26; i++){ //write new panel name EEPROM.write(i,panelNameList[x]); x++; } lcd.blink_off(); EEPROM.commit(); configPage = 8; cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; x=0; panelName = ""; for (int i=11; i<=26; i++){ //read panel name if (EEPROM.read(i) != 0){ panelName = panelName + (char)EEPROM.read(i); panelNameList[x] = EEPROM.read(i); x++; } } } else if (drillPressed == true and drillStillPressed == false){ currentConfigTop = "e"; //make sure the screen re-renders if (cursorPosition != 15){ cursorPosition++; } else { cursorPosition = 0; } } if (configPage == 10){ //make sure the panel doesn't re-render the text on the previous page when exiting configBottom = ""; for (int i=0; i<=15; i++){ //generate name to print on lcd configBottom = configBottom + (char)panelNameList[i]; } } //----------------------------------------------------------------------------- SETTINGS > PANEL > PANEL NAME //----------------------------------------------------------------------------- SETTINGS > PANEL > FACTORY RESET } else if (configPage == -1){ configBottom = "drill = yes"; configTop = "silence = no"; if (silencePressed == true and silenceStillPressed == false){ configPage = 8; cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ digitalWrite(readyLed, LOW); //ready LED lcd.clear(); lcd.setCursor(0,0); lcd.print("RESETTING TO"); lcd.setCursor(0,1); lcd.print("FACTORY SETTINGS"); resetEEPROM(); delay(4000); ESP.restart(); } //----------------------------------------------------------------------------- SETTINGS > PANEL > FACTORY RESET //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM > CODING } else if (configPage == 5){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; if (codeWheel == 1){ configTop = (String)mainSettingsFireAlarmSettingsCoding[1]+"*"; } else{ configTop = (String)mainSettingsFireAlarmSettingsCoding[1]; } if (codeWheel == 2){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[2]+"*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[2]; } } else if (cursorPosition == 1) { cursorPosition = 2; if (codeWheel == 2){ configTop = (String)mainSettingsFireAlarmSettingsCoding[2]+"*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[2]; } if (codeWheel == 3){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[3]+"*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[3]; } } else if (cursorPosition == 2) { cursorPosition = 3; if (codeWheel == 3){ configTop = (String)mainSettingsFireAlarmSettingsCoding[3]+"*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[3]; } if (codeWheel == 4){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[4]+"*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[4]; } } else if (cursorPosition == 3) { cursorPosition = 4; if (codeWheel == 4){ configTop = (String)mainSettingsFireAlarmSettingsCoding[4]+"*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[4]; } if (codeWheel == 5){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[5]+"*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[5]; } } else if (cursorPosition == 4) { cursorPosition = 5; if (codeWheel == 5){ configTop = (String)mainSettingsFireAlarmSettingsCoding[5]+"*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[5]; } if (codeWheel == 0){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[0]+"*"; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[0]; } } else if (cursorPosition == 5) { cursorPosition = 0; if (codeWheel == 0){ configTop = (String)mainSettingsFireAlarmSettingsCoding[0]+"*"; } else { configTop = (String)mainSettingsFireAlarmSettingsCoding[0]; } if (codeWheel == 1){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[1]+"*"; } else{ configBottom = (String)mainSettingsFireAlarmSettingsCoding[1]; } } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 3; //change screen to facp settings cursorPosition = 0; configTop = (String)mainSettingsFireAlarmSettings[0]; configBottom = (String)mainSettingsFireAlarmSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ EEPROM.write(7,cursorPosition); //write the new codewheel settings to eeprom EEPROM.commit(); configTop = (String)mainSettingsFireAlarmSettingsCoding[cursorPosition]+"*"; if (cursorPosition == 5){ configBottom = (String)mainSettingsFireAlarmSettingsCoding[0]; } else { configBottom = (String)mainSettingsFireAlarmSettingsCoding[cursorPosition+1]; } codeWheel = EEPROM.read(7); //codeWheel setting address } //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM > CODING //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM > VERIFICATION } else if (configPage == 4){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; configTop = (String)mainSettingsVerificationSettings[1]; configBottom = (String)mainSettingsVerificationSettings[0]+isVerification; } else if (cursorPosition == 1) { cursorPosition = 0; configTop = (String)mainSettingsVerificationSettings[0]+isVerification; configBottom = (String)mainSettingsVerificationSettings[1]; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 3; cursorPosition = 0; configTop = (String)mainSettingsFireAlarmSettings[0]; configBottom = (String)mainSettingsFireAlarmSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ if (isVerification == true){ isVerification = false; EEPROM.write(9,0); } else { isVerification = true; EEPROM.write(9,1); } EEPROM.commit(); configTop = (String)mainSettingsVerificationSettings[0]+isVerification; configBottom = (String)mainSettingsVerificationSettings[1]; } else if (cursorPosition == 1) { //computer do shit } } //----------------------------------------------------------------------------- SETTINGS > FIRE ALARM > VERIFICATION //----------------------------------------------------------------------------- SETTINGS > PANEL > PANEL SECURITY } else if (configPage == 9){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; if (keyRequiredVisual == true){ configTop = (String)mainPanelSettingsPanelSecurity[1]+"*"; configBottom = (String)mainPanelSettingsPanelSecurity[0]; } else { configTop = (String)mainPanelSettingsPanelSecurity[1]; configBottom = (String)mainPanelSettingsPanelSecurity[0]+"*"; } } else if (cursorPosition == 1) { cursorPosition = 0; if (keyRequiredVisual == true){ configTop = (String)mainPanelSettingsPanelSecurity[0]; configBottom = (String)mainPanelSettingsPanelSecurity[1]+"*"; } else { configTop = (String)mainPanelSettingsPanelSecurity[0]+"*"; configBottom = (String)mainPanelSettingsPanelSecurity[1]; } } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 8; cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; } else if (drillPressed == true and drillStillPressed == false){ if (cursorPosition == 0){ EEPROM.write(8,0); //write the new keyswitch settings to eeprom EEPROM.commit(); keyRequiredVisual = false; configTop = (String)mainPanelSettingsPanelSecurity[0]+"*"; configBottom = (String)mainPanelSettingsPanelSecurity[1]; } else if (cursorPosition == 1) { EEPROM.write(8,1); //write the new keyswitch settings to eeprom EEPROM.commit(); keyRequiredVisual = true; configTop = (String)mainPanelSettingsPanelSecurity[1]+"*"; configBottom = (String)mainPanelSettingsPanelSecurity[0]; } } //----------------------------------------------------------------------------- SETTINGS > PANEL > PANEL SECURITY } else if (configPage == 12){ if (resetPressed == true and resetStillPressed == false){ if (cursorPosition == 0){ cursorPosition = 1; configTop = (String)mainPanelSettingsAbout[1]+firmwareRev; configBottom = (String)mainPanelSettingsAbout[2]; } else if (cursorPosition == 1) { cursorPosition = 2; configTop = (String)mainPanelSettingsAbout[2]; configBottom = (String)mainPanelSettingsAbout[0]; } else if (cursorPosition == 2) { cursorPosition = 0; configTop = (String)mainPanelSettingsAbout[0]; configBottom = (String)mainPanelSettingsAbout[1]+firmwareRev; } } else if (silencePressed == true and silenceStillPressed == false){ configPage = 8; cursorPosition = 0; configTop = (String)mainPanelSettings[0]; configBottom = (String)mainPanelSettings[1]; } //----------------------------------------------------------------------------- SETTINGS > PANEL > ABOUT } // if (resetPressed == true and resetStillPressed == false){ // } else if (silencePressed == true and silenceStillPressed == false){ // } else if (drillPressed == true and drillStillPressed == false){ // } if (configTop != currentConfigTop or configBottom != currentConfigBottom){ lcd.clear(); lcd.setCursor(0,0); if (configPage != -1){ // if (configTop.indexOf("*")>0){ //replace any "*" with nothing, then add a check mark to the end // lcd.print("]" + configTop.replace("*","")); // } else { //---------------------------------------------------------------------------------------- experimental code for check lcd.print("]" + configTop); //} } else { lcd.print(configTop); } lcd.setCursor(0,1); lcd.print(configBottom); currentConfigTop = configTop; currentConfigBottom = configBottom; if (configPage == 10){ lcd.setCursor(cursorPosition,1); } } if (digitalRead(resetButtonPin) == HIGH){ //RESET BUTTON resetStillPressed = true; } if (digitalRead(silenceButtonPin) == HIGH){ //SILENCE BUTTON silenceStillPressed = true; } if (digitalRead(drillButtonPin) == HIGH){ //DRILL BUTTON drillStillPressed = true; } } void lcdBacklight(){ if (lcdTimeout!=0){ if (lcdTimeout <= lcdTimeoutTimer and backlightOn == true){ lcd.noBacklight(); backlightOn = false; } else if (backlightOn == true) { lcdTimeoutTimer++; } if (drillPressed == true or silencePressed == true or resetPressed == true or fullAlarm == true or trouble == true or (keyInserted == true and keyRequired == true)){ lcdTimeoutTimer = 0; if (backlightOn == false){ lcd.backlight(); } backlightOn = true; } } } void loop() { systemClock = millis(); //-------------------- SYSTEM CLOCK if (systemClock-lastPulse >= 1){ //------------------------------------------------------ CHECK LCD BACKLIGHT lcdBacklight(); //------------------------------------------------------ CHECK LCD BACKLIGHT //------------------------------------------------------ CHECK KEY checkKey(); //------------------------------------------------------ CHECK KEY //------------------------------------------------------ CHECK ACTIVATING DEVICES checkDevices(); //------------------------------------------------------ CHECK ACTIVATING DEVICES troubleCheck(); //trouble check alarm(); //alarm codewheel //------------------------------------------------------ CHECK BUTTONS if (((keyInserted == true and keyRequired == true) or (keyInserted==false and keyRequired==false)) and configMenu == false){ checkButtons(); //check if certain buttons are pressed } //------------------------------------------------------ CHECK BUTTONS //------------------------------------------------------ UPDATE LCD DISPLAY if (buttonCheckTimer >= 20){ if (configMenu==false){ lcdUpdate(); } else if (configMenu==true) { if ((keyInserted == true and keyRequired == true) or (keyInserted==false and keyRequired==false)){ config(); } } buttonCheckTimer = 0; } else { buttonCheckTimer++; } //------------------------------------------------------ UPDATE LCD DISPLAY lastPulse = millis(); //update last pulse } }