Lexzach/antigneous
Lexzach/antigneous
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 1 Activity

uptime

Browse Source
This commit is contained in:
Lexzach 2023-03-27 11:30:27 -04:00
parent 4565d0aacf
commit 02d40153f7
Signed by: Lexzach
GPG Key ID: B574880929E6F1F0
2 changed files with 32 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
instructions/antigneous_tech_instructions.odt
View File

Binary file not shown.

36
main/main.ino
View File

@ -73,7 +73,8 @@ int zone1Count = 0; //walk test variables
int zone2Count = 0;
int zoneAlarm = 0; //which zone is in alarm 0 - none | 1 - zone 1 | 2 - zone 2 | 3 - zone 1 & 2 | 4 - drill
int zoneTrouble = 0; //which zone is in trouble 0 - none | 1 - zone 1 | 2 - zone 2 | 3 - zone 1 & 2
int powerOnHours = 0;
int powerOnMinutes = 0; //amount of hours the panel has been powered on for, kinda like an odometer for the FACP
int powerOnMinutesCounter = 0; //keep track of when to iterate the EEPROM value for uptime minutes
String configTop; //configuration menu strings for lcd
String configBottom;
String currentConfigTop; //configuration menu strings for current lcd display
@ -211,6 +212,11 @@ void resetEEPROM() {
Serial.println("Enabled audible silence");
EEPROM.write(80,0); //lcd timeout is disabled by default (time in MS found by taking value and multiplying it by 15000)
Serial.println("Disabled LCD timeout");
EEPROM.write(81,0);
EEPROM.write(82,0);
EEPROM.write(83,0);
EEPROM.write(84,0);
Serial.println("Set runtime to 0 minutes");
EEPROM.commit();
@ -222,7 +228,7 @@ void setup() {
EEPROM.begin(512); //allocate memory address 0-1024 for EEPROM
Serial.println("Configured EEPROM for addresses 0-512");
Serial.begin(115200); //begin serial
Serial.println("Lexzach's Low-Cost FACP v1.5");
Serial.println("Lexzach's Low-Cost FACP");
Serial.println("Booting...");
//----------------------------------------------------------------------------- SETUP PINS
@ -346,7 +352,7 @@ void setup() {
lcd.print("IO-SLFTST");
Serial.println("Current EEPROM dump:"); //dump EEPROM into serial monitor
for (int i=0; i<=1024; i++){
for (int i=0; i<=511; i++){
Serial.print(i);
Serial.print(":");
Serial.print(EEPROM.read(i));
@ -376,6 +382,11 @@ void setup() {
panelHomescreen = EEPROM.read(78);
lcdTimeout = EEPROM.read(80)*15000;
strobeSync = EEPROM.read(29);
byte byte_array[4];
for (int i = 0; i < 4; i++) {
byte_array[i] = EEPROM.read(81+i); // read each byte from consecutive addresses
powerOnMinutes = powerOnMinutes | ((unsigned long)byte_array[i] << (i * 8)); // reconstruct the number from the bytes
}
int x=0;
for (int i=11; i<=26; i++){ //read panel name
if (EEPROM.read(i) != 0){
@ -1070,7 +1081,7 @@ void config(){
char *mainPanelSettingsPanelSecurity[] = {"None","Keyswitch","Passcode"}; //menu 9
char *mainPanelSettingsPanelName[] = {"Enter Name:"}; //menu 10
char *mainSettingsFireAlarmSettingsStrobeSync[] = {"None","System Sensor","Wheelock", "Gentex","Simplex"}; //menu 11
char *mainPanelSettingsAbout[] = {"Antigneous FACP","Firmware: ","by Lexzach"}; //menu 12
char *mainPanelSettingsAbout[] = {"Antigneous FACP","Firmware: ","by Lexzach","Hrs."}; //menu 12
if (digitalRead(resetButtonPin)){ //RESET BUTTON
resetPressed = true;
@ -2000,6 +2011,21 @@ void smokeDetector(){
}
}
void powerOnTracker(){
if (powerOnMinutesCounter >= 600){
powerOnMinutesCounter = 0;
powerOnMinutes++;
byte byte_array[4];
for (int i = 0; i < 4; i++) {
byte_array[i] = (powerOnMinutes >> (i * 8)) & 0xFF; // split number into four bytes
EEPROM.write(81+i, byte_array[i]); // store each byte in consecutive addresses
}
EEPROM.commit();
} else {
powerOnMinutesCounter++;
}
}
void failsafe(){ //--------------------------------------------- FAILSAFE MODE IN CASE PANEL CANT BOOT NORMALLY
if ((analogRead(zone1Pin) == 0 or analogRead(zone2Pin) == 0) and not fullAlarm){
fullAlarm = true;
@ -2067,6 +2093,8 @@ void loop() {
if (systemClock-lastPulse >= 1){
if (not failsafeMode){ //execute the loop only if the panel is not in failsafe mode
powerOnTracker(); //---------------------------------------------------- INCREMENT THE POWER ON MINUTES
lcdBacklight(); //------------------------------------------------------ CHECK LCD BACKLIGHT
checkDevices(); //------------------------------------------------------ CHECK ACTIVATING DEVICES